I cannot see it in the Marketplace/Skins.
The screenshot is from a demo I was watching and shows Site Builder. I cannot find where to add/download it.
updated by @isleander: 12/18/14 03:38:10PM
JAMROOM
Site Builder Download
Does any one know where I can download "Site Builder", as it is not an option with the two free skins?
I cannot see it in the Marketplace/Skins.
The screenshot is from a demo I was watching and shows Site Builder. I cannot find where to add/download it.
updated by @isleander: 12/18/14 03:38:10PM
I cannot see it in the Marketplace/Skins.
The screenshot is from a demo I was watching and shows Site Builder. I cannot find where to add/download it.
updated by @isleander: 12/18/14 03:38:10PM
You may need to add the beta channel to the marketplace in your admin panel, but cant be certain
Thanks Gary,
I don't see it in Market Place - yet it is featured on a Jamroom demo video.
How do I add the Beta Channel?
updated by @isleander: 11/03/14 04:15:43AM
I don't see it in Market Place - yet it is featured on a Jamroom demo video.
How do I add the Beta Channel?
updated by @isleander: 11/03/14 04:15:43AM
Go to admin - marketplace - tools - select the channel releases and add the beta one
Go into your Admin Control Panel -> Core -> Marketplace -> Tools -> Release Channels and click on the "Make Active" button next to the "beta" channel - this will make it so beta releases will show up in your Marketplace. Search for "Site Builder"
Then you can install the Site Builder modules right from within the Marketplace.
Hope this helps!
--
Paul Asher - JR Developer and System Import Specialist
Then you can install the Site Builder modules right from within the Marketplace.
Hope this helps!
--
Paul Asher - JR Developer and System Import Specialist
Thank you Paul and Gary. But install failed...
updated by @isleander: 11/03/14 07:26:29AM
updated by @isleander: 11/03/14 07:26:29AM
Isleander:
Thank you Paul and Gary. But install failed...
Thank you Paul and Gary. But install failed...
Can you let me know the error you see when you try to install it? That will tell us where the issue is.
Thanks!
--
Brian Johnson
Founder and Lead Developer - Jamroom
https://www.jamroom.net
I installed the skin, but when I set it to "active" it failed. Currently I just have a blank site?
updated by @isleander: 11/03/14 07:33:06AM
updated by @isleander: 11/03/14 07:33:06AM
Isleander:
I installed the skin, but when I set it to "active" it failed. Currently I just have a blank site?
I installed the skin, but when I set it to "active" it failed. Currently I just have a blank site?
ahh - sounds like the skin is trying to pull in features that are note active yet (probably from the site builder modules). Michael is the lead for the Site Builder project, and he's actually out of town, so I'm not 100% certain if that is the case, but here's how to get it back:
1) You'll need to go into your hosting control panel and fire up phpMyAdmin (or go into phpMyAdmin if you have a link to it, or other Database browser)
2) go into the jr_jrcore_settings table and find the "active_skin" row for the jrCore module, and set the "value" to "jrElastic". Save that
3) EMPTY the contents of the jr_jrcore_cache table (i.e. "TRUNCATE TABLE jr_jrcore_cache)
That should get you back to elastic.
I will open a ticket for Michael on this, as switch skins should never end up like this, so sorry for that.
Let me know if that helps.
Thanks!
--
Brian Johnson
Founder and Lead Developer - Jamroom
https://www.jamroom.net
OK Brian, I'll take look into that...
and let you know how I get on.
Thanks again,
and let you know how I get on.
Thanks again,
Isleander:
OK Brian, I'll take look into that...
and let you know how I get on.
Thanks again,
OK Brian, I'll take look into that...
and let you know how I get on.
Thanks again,
No problem - let me know if that doesn't fix it for you and I can check it out.
Thanks!
--
Brian Johnson
Founder and Lead Developer - Jamroom
https://www.jamroom.net
I've changed the skin value.. I'm now on the cache page.. (see screenshot).
Do I delete each entry or what?
updated by @isleander: 11/03/14 07:49:50AM
Do I delete each entry or what?
updated by @isleander: 11/03/14 07:49:50AM
Yeah you can checkmark them all and delete them, or you can run this SQL command:
and empty them all at once.
Hope this helps!
--
Brian Johnson
Founder and Lead Developer - Jamroom
https://www.jamroom.net
TRUNCATE TABLE jr_jrcore_cache;
and empty them all at once.
Hope this helps!
--
Brian Johnson
Founder and Lead Developer - Jamroom
https://www.jamroom.net
Thanks Brian... yes, that sorted it. Back as it was now.
Really appreciated your help.
updated by @isleander: 11/03/14 07:57:24AM
Really appreciated your help.
updated by @isleander: 11/03/14 07:57:24AM
Right on - glad to hear that. If you want to re-enable the site builder, what you want to do is:
1) Make sure all site builder modules have been installed from the Marketplace
2) make sure all the site build modules are ACTIVE (go to their info tab and make sure they are all enabled)
3) finally go to the skins tab and enable the Slate Site Builder skin
Doing in that order should work - as the skin looks for specific functionality we can be sure all the modules are active so it should work. If however it ends up in a white screen again, something is wrong with a template in the skin.
You can see if there are any template errors by going into the Activity Logs -> PHP Error Log and see if there are any entries in there.
Hope this helps!
--
Brian Johnson
Founder and Lead Developer - Jamroom
https://www.jamroom.net
1) Make sure all site builder modules have been installed from the Marketplace
2) make sure all the site build modules are ACTIVE (go to their info tab and make sure they are all enabled)
3) finally go to the skins tab and enable the Slate Site Builder skin
Doing in that order should work - as the skin looks for specific functionality we can be sure all the modules are active so it should work. If however it ends up in a white screen again, something is wrong with a template in the skin.
You can see if there are any template errors by going into the Activity Logs -> PHP Error Log and see if there are any entries in there.
Hope this helps!
--
Brian Johnson
Founder and Lead Developer - Jamroom
https://www.jamroom.net
OK Thanks Brian... I'll let you know how I get on.
Brian,
I managed to install the modules and the Slate Site Builder skin, but the whole thing runs really slow, and it seemed to me that not everything worked as it should.
I'll no doubt try it again once it's out of beta.
Thanks again for your help.
I managed to install the modules and the Slate Site Builder skin, but the whole thing runs really slow, and it seemed to me that not everything worked as it should.
I'll no doubt try it again once it's out of beta.
Thanks again for your help.
Isleander:
Brian,
I managed to install the modules and the Slate Site Builder skin, but the whole thing runs really slow, and it seemed to me that not everything worked as it should.
I'll no doubt try it again once it's out of beta.
Thanks again for your help.
Brian,
I managed to install the modules and the Slate Site Builder skin, but the whole thing runs really slow, and it seemed to me that not everything worked as it should.
I'll no doubt try it again once it's out of beta.
Thanks again for your help.
Thanks for the feedback!
The Site Builder should definitely not be slow - double check that you:
- are not running with Developer Mode enabled (ACP -> Tools -> Developer Tools)
- are not running with your ACP -> Core -> Global Config - Cache Seconds set to 0
- are running on a decent hosting provider.
Jamroom is very, very fast when setup properly and running on good hosting.
Hope this helps!
--
Brian Johnson
Founder and Lead Developer - Jamroom
https://www.jamroom.net
Hey Brian
Slightly off topic, but will the provision be made, or is it available, to take the slate skin, clone it, redesign it, ship it and have quick built in support for site builder in premium themes?
Slightly off topic, but will the provision be made, or is it available, to take the slate skin, clone it, redesign it, ship it and have quick built in support for site builder in premium themes?
Brian,
I set up another site and run the Site Builder on it and it runs faster, although I am unable to change the logo image (logo.png ) at present.
I have this system error:
FFMpeg binary executable fail modules/jrCore/tools/ffmpeg is not functioning properly
http://regal-network.com/jam/
updated by @isleander: 11/04/14 12:59:35PM
I set up another site and run the Site Builder on it and it runs faster, although I am unable to change the logo image (logo.png ) at present.
I have this system error:
FFMpeg binary executable fail modules/jrCore/tools/ffmpeg is not functioning properly
http://regal-network.com/jam/
updated by @isleander: 11/04/14 12:59:35PM
If you've uploaded a new logo.png to your skins/jrSlate/img directory, try clearing your cache as I suggested in your other post about profiles not showing up.
Hope this helps!
--
Douglas Hackney
Jamroom Team - Designer/Developer/Support
FAQ-Docs-Help Videos
Hope this helps!
--
Douglas Hackney
Jamroom Team - Designer/Developer/Support
FAQ-Docs-Help Videos
Isleander:I have this system error:
FFMpeg binary executable fail modules/jrCore/tools/ffmpeg is not functioning properly
FFMpeg binary executable fail modules/jrCore/tools/ffmpeg is not functioning properly
In the top menu, ACP > System Tools > System Check, - does it give you further info there?
You probably need to set different permissions on that file:
/modules/jrCore/tools/ffmpeg
If you are on a mac server replace that file with the relevant download from here: http://ffmpegmac.net/
--
¯\_(ツ)_/¯ Education, learning resources, TEL, AR/VR/MR, CC licensed content, panoramas, interactive narrative, sectional modules (like jrDocs), lunch at Uni of Bristol. Get in touch if you share my current interests or can suggest better :)
SteveX,
"You probably need to set different permissions on that file:
/modules/jrCore/tools/ffmpeg "
What permissions do I need - any idea?
Not hosted on a Mac Server, but do use a Mac Desktop, but doubt there's any connection there?
Thanks
"You probably need to set different permissions on that file:
/modules/jrCore/tools/ffmpeg "
What permissions do I need - any idea?
Not hosted on a Mac Server, but do use a Mac Desktop, but doubt there's any connection there?
Thanks
For the permissions try 777
If you want to run Jamroom locally on your mac desktop there is documentation on installing and configuring Ampps here:
https://www.jamroom.net/ultrajam/documentation/guides/2146/installing-ampps-locally-on-mac-os-x
--
¯\_(ツ)_/¯ Education, learning resources, TEL, AR/VR/MR, CC licensed content, panoramas, interactive narrative, sectional modules (like jrDocs), lunch at Uni of Bristol. Get in touch if you share my current interests or can suggest better :)
If you want to run Jamroom locally on your mac desktop there is documentation on installing and configuring Ampps here:
https://www.jamroom.net/ultrajam/documentation/guides/2146/installing-ampps-locally-on-mac-os-x
--
¯\_(ツ)_/¯ Education, learning resources, TEL, AR/VR/MR, CC licensed content, panoramas, interactive narrative, sectional modules (like jrDocs), lunch at Uni of Bristol. Get in touch if you share my current interests or can suggest better :)
gary.moncrieff:...Slightly off topic, but will the provision be made, or is it available, to take the slate skin, clone it, redesign it, ship it and have quick built in support for site builder in premium themes?
Please do.
If you would like to help out during the beta period it would be appreciated.
Here's the Site Builder specific forum:
https://www.jamroom.net/site-builder/forum
